Freud Undersize Plywood bits are designed to rout perfectly fitted grooves and dadoes for today’s undersized plywood panels. These two sets include bits that match up to the actual thickness of 1/4″, 1/2″ and 3/4″ plywood. Choose 1/4″ or 1/2″ shank sets. Both include a wooden case, and are suitable for use with hand-held or […]

1-1/8″ Up Cut Spiral Ball Nose Solid Carbide Bit. Includes 2 flutes and 1/4″ diameter. 1/4″ Shank. Freud Ball Nose Bits are ideal for routing plastics, composites, wood or solid surface materials. Use for grooving or edge work. With an extra-long cutting length, this tool allows for deeper grooves, but always make deep cuts in […]

This clever bit is designed to hang pictures, plaques or even shelves with completely concealed fasteners. The large diameter end bores holes to allow nail or screw heads to enter the slot, and the smaller diameter allows room for the shank of the nail or screw. Great for hard or soft wood or composites, using […]

Freud’s Reversible Wainscoting Bit is a fast, easy way to add rail & stile profiled wainscoting to existing wall surfaces. The bit height is set one time for male and female joints without requiring fence or height adjustments. Just route stiles face down and rails face up for a perfect fit. Works with stock from […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s Flush Trim Bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes, or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s Flush Trim Bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes, or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and […]

7.5° x 1/4″ Engraving V-Groove Solid Carbide Bit. 45/64″ Cutting Length. 1/4″ Shank. Perfect for engraving and lettering applications in hard or soft wood, or composite materials. Ideal for Wood, Wood Composites, Plastics (Hard & Soft), and Aluminum for 2D and 3D Carving. **Technical Specifications:** – Brand: Freud – Overall Diameter: 1/4″ – Carbide Height: […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s patented Adjustable Tongue and Groove Set is the ideal set for building Shaker-style cabinet doors, or any project requiring precise tongue & groove joints with perfect finished surfaces. The exclusive design features cutters with opposing shear angles to eliminate chipping on both the top and bottom surfaces of your work. And the spacer system […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. These […]

Panel Pilot bits are the fast, efficient solution for cutting openings in paneling, siding, sheathing and other applications were speed and accuracy are the primary considerations. Freud’s carbide tipped and solid carbide Panel Pilot Bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting, and the pilot acts as […]

Solid carbide up spiral bits combine effective chip removal with a cut quality that can’t be matched by standard straight bits. Ideal for through-cuts, mortises and deep blind holes in production applications. The up spiral design provides the best cut quality on the bottom surface of the material. Use these bits in CNC, hand-held or […]

Freud offers a huge selection of Decorative Edge Bits, most featuring our patented Quadra-Cut design for an extra-fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using hand-held or table-mounted routers. **Technical Specifications:** – […]

Rabbeting Bits are a versatile solution for any woodworker or cabinetmaker. Use them to make strong lap joints, cut recesses to let in the back panels of cabinets, or create an interesting detail on built-up molding. Produces super smooth cuts on both surfaces of the rabbet. By interchanging bearings you can create many different rabbet […]

Producing smooth, precise, accurate slots. For premium performance use with Freud slotting cutters, although compatible with any slotting cutter with a 5/16″ bore. Arbors may be used with hand-held or table-mounted routers.

Panel Pilot bits are the fast, efficient solution for cutting openings in paneling, siding, sheathing and other applications were speed and accuracy are the primary considerations. Freud’s carbide tipped and solid carbide Panel Pilot Bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting, and the pilot acts as […]

Ideal for following templates, routing sign lettering and other tasks where the pattern is placed on top of the work piece. The top mounted bearings on these bits make them ideal for almost any application where the work piece is being grooved or routed out. Use in hand-held or table-mounted routers to rout hardwood, softwood, […]

The perfect bits for template routing, the Top & Bottom Bearing Flush Trim Bits allow you to choose the cutting direction that best suits your project or work piece. Ideal for pattern work, these bits are also good for routing laminated tops and general flush trim routing. Use either the top or the bottom bearing […]