Should be used with Freud’s slotting cutter arbors 60-100 for 1/4″ shanks and 60-102 for These cutters are a fast, efficient way to rout slots and grooves for T-moldings, spline joints, tongue & groove joints and many other applications. Should be used with Freud’s slotting cutter arbors 60-100 for 1/4″ shanks, 60-102 for 1/2″ shanks, […]

Solid carbide up spiral bits combine effective chip removal with a cut quality that can’t be matched by standard straight bits. Ideal for through-cuts, mortises and deep blind holes in production applications. The up spiral design provides the best cut quality on the bottom surface of the material. Use these bits in CNC, hand-held or […]

Freud offers a huge selection of Decorative Edge Bits, most featuring our patented Quadra-Cut design for an extra-fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using hand-held or table-mounted routers. **Technical Specifications:** – […]

Freud Rabbeting Sets make versatile Rabbeting bits even more useful in the shop by offering a wide range of different depths of cut. With interchangeable bearings to cut rabbets of different depths, these sets provide a fast, easy way to adjust the size of the profile. Use them to make strong rabbeted joints, cut recesses […]

7.5° x 1/4″ Engraving V-Groove Solid Carbide Bit. 45/64″ Cutting Length. 1/4″ Shank. Perfect for engraving and lettering applications in hard or soft wood, or composite materials. Ideal for Wood, Wood Composites, Plastics (Hard & Soft), and Aluminum for 2D and 3D Carving. **Technical Specifications:** – Brand: Freud – Overall Diameter: 1/4″ – Carbide Height: […]

This clever bit is designed to hang pictures, plaques or even shelves with completely concealed fasteners. The large diameter end bores holes to allow nail or screw heads to enter the slot, and the smaller diameter allows room for the shank of the nail or screw. Great for hard or soft wood or composites, using […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Panel Pilot bits are the fast, efficient solution for cutting openings in paneling, siding, sheathing and other applications were speed and accuracy are the primary considerations. Freud’s carbide tipped and solid carbide Panel Pilot Bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting, and the pilot acts as […]

Round Nose Bits add a beautiful engraved detail to cabinet doors, drawer fronts, and fluted millwork, and they are also a great choice for routing sign lettering. Sometimes called “Core Box” bits, these tools can be used in CNC, hand-held or table-mounted routers to cut hardwood, softwood, plywood and composites. **Technical Specifications:** – Brand: Freud […]

1-1/8″ Up Cut Spiral Ball Nose Solid Carbide Bit. Includes 2 flutes and 1/4″ diameter. 1/4″ Shank. Freud Ball Nose Bits are ideal for routing plastics, composites, wood or solid surface materials. Use for grooving or edge work. With an extra-long cutting length, this tool allows for deeper grooves, but always make deep cuts in […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. These […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. These […]

Bevel Trim Bits produce a clean, finished edge on plastic laminates with little or no filing. Choose among bevel angles from 8 degrees to 45 degrees in the 41-series bits, which also include a ball bearing guide. Or choose the solid carbide 66-100 for a 7 degree bevel in a very cost effective tool. **Technical […]

Panel Pilot bits are the fast, efficient solution for cutting openings in paneling, siding, sheathing and other applications were speed and accuracy are the primary considerations. Freud’s carbide tipped and solid carbide Panel Pilot Bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting, and the pilot acts as […]

The chamfer profile seems simple, but it is a great solution for lots of multiple-sided projects, joinery, and easing edges. Creates a uniform chamfer on the edge of any work piece to add character, while retaining crisp geometric lines. #40-094 makes 16-sided pieces and #40-098 makes 12-sided pieces. Routs hardwood, softwood, plywood and composites; use […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. These […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]