The ultimate combination blade is now available in a thin kerf design for less amp draw and reduced material waste. This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, […]

This thin kerf blade is specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8″ to 1″ thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. This […]

Ideal for furniture, stair treads or half-round moldings, these bits produce a fully semicircular edge on dimensional lumber or an attractive profile on furniture and moldings. Comes with ball bearing guide for template work or to held align your router table fence. Use with a template, router table fence or router edge guide. Cuts hardwood, […]

Bevel Trim Bits produce a clean, finished edge on plastic laminates with little or no filing. Choose among bevel angles from 8 degrees to 45 degrees in the 41-series bits, which also include a ball bearing guide. Or choose the solid carbide 66-100 for a 7 degree bevel in a very cost effective tool. **Technical […]

7.5° x 1/4″ Engraving V-Groove Solid Carbide Bit. 45/64″ Cutting Length. 1/4″ Shank. Perfect for engraving and lettering applications in hard or soft wood, or composite materials. Ideal for Wood, Wood Composites, Plastics (Hard & Soft), and Aluminum for 2D and 3D Carving. **Technical Specifications:** – Brand: Freud – Overall Diameter: 1/4″ – Carbide Height: […]

Create rock-solid interlocking corner joints with Freud Lock Miter Bits. For 90 degree joints use the 99-034 or 99-035 bits. These bits are designed to rout one piece horizontally on the router table, and the other piece standing vertical. For precise 45 degree joints us the 99-043 set, with one bit routing the tongue and […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. These […]

Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, “soften” sharp edges of parts, and so many other tasks. Most of these bits also feature Freud’s unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your […]

Freud’s Flush Trim Bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes, or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and […]

New Precision Shear™ Forstner Bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive Forstner Bit designs produce […]

Eliminate hours of tedious filing with Freud’s Radius Laminate Trim Bit. This bit routs the laminate edge flush and rounded in a single pass, reducing time and aggravation and creating a finish that normally require hours of difficult hand filing. Use in hand-held or table-mounted routers and laminate trimmers. **Technical Specifications:** – Brand: Freud – […]

Freud Undersize Plywood bits are designed to rout perfectly fitted grooves and dadoes for today’s undersized plywood panels. These two sets include bits that match up to the actual thickness of 1/4″, 1/2″ and 3/4″ plywood. Choose 1/4″ or 1/2″ shank sets. Both include a wooden case, and are suitable for use with hand-held or […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. These […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud O-Flute bits are designed for smooth finishes on solid surface and plastics such as ABS, UHMW, acrylic, nylon and polycarbonate. The up shear design provides fast chip clearance, and delivers the best cut quality on the bottom surface. The O-Flute design delivers cooler cuts in plastic to avoid melting. Use these bits in any […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Round Nose Bits add a beautiful engraved detail to cabinet doors, drawer fronts, and fluted millwork, and they are also a great choice for routing sign lettering. Sometimes called “Core Box” bits, these tools can be used in CNC, hand-held or table-mounted routers to cut hardwood, softwood, plywood and composites. **Technical Specifications:** – Brand: Freud […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s new Cabinetmaker’s crosscut blade includes a 38 degree Hi-ATB (Alternate Top Bevel) tooth grind that delivers excellent crosscuts in double-sided veneer plywood and double-sided melamine. With its newly added Perma-SHIELD® non-stick coating and tooth geometry, this blade is designed primarily for heavy use in a cabinetmaker’s shop. The LU73R series is ideal for cutting […]