Freud offers a huge selection of Decorative Edge Bits, most featuring our patented Quadra-Cut design for an extra-fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using hand-held or table-mounted routers. **Technical Specifications:** – […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. These […]

This clever bit is designed to hang pictures, plaques or even shelves with completely concealed fasteners. The large diameter end bores holes to allow nail or screw heads to enter the slot, and the smaller diameter allows room for the shank of the nail or screw. Great for hard or soft wood or composites, using […]

Bevel Trim Bits produce a clean, finished edge on plastic laminates with little or no filing. Choose among bevel angles from 8 degrees to 45 degrees in the 41-series bits, which also include a ball bearing guide. Or choose the solid carbide 66-100 for a 7 degree bevel in a very cost effective tool. **Technical […]

Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, “soften” sharp edges of parts, and so many other tasks. Most of these bits also feature Freud’s unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your […]

New Precision Shear™ Forstner Bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive Forstner Bit designs produce […]

Ideal for furniture, stair treads or half-round moldings, these bits produce a fully semicircular edge on dimensional lumber or an attractive profile on furniture and moldings. Comes with ball bearing guide for template work or to held align your router table fence. Use with a template, router table fence or router edge guide. Cuts hardwood, […]

Freud’s unique Premier Adjustable Rail and Stile System builds perfect doors in material from 5/8″ to 1-1/4″ thick, and also features Freud’s patented technology for producing extra-strong long tenon joints. The System also includes adjustable shims to adjust the panel groove from 7/32″(5.5mm) for thinner plywood panels to 3/8″ (9.5mm) thick for larger solid wood […]

Freud’s unique Premier Adjustable Rail and Stile System builds perfect doors in material from 5/8″ to 1-1/4″ thick, and also features Freud’s patented technology for producing extra-strong long tenon joints. The System also includes adjustable shims to adjust the panel groove from 7/32″(5.5mm) for thinner plywood panels to 3/8″ (9.5mm) thick for larger solid wood […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s Flush Trim Bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes, or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and […]

The perfect bits for template routing, the Top & Bottom Bearing Flush Trim Bits allow you to choose the cutting direction that best suits your project or work piece. Ideal for pattern work, these bits are also good for routing laminated tops and general flush trim routing. Use either the top or the bottom bearing […]

These heavy-duty bits are the ideal choice for routing thick material where a perfect finish is critical. The down-shear cutting action produces a very clean, slinter-free surface on the top edge of the cut, and the oversize 3/4″ diameter body provides extra stability for a clean face. Use the 42-310 for jobs where limited clearance […]

New Precision Shear™ Forstner Bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive Forstner Bit designs produce […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s range of dedicated saw blades for picture frames and molding saw blades deliver superior finishes in solid wood and man-made materials when in crosscutting and mitering applications. Freud-made TiCo™ Hi-Density Carbide coupled with Freud’s Silver I.C.E (Industrial Cooling Element) [or Perma-SHIELD coating] gives these blades the longest run time of other similar blades available […]

Solid carbide up spiral bits combine effective chip removal with a cut quality that can’t be matched by standard straight bits. Ideal for through-cuts, mortises and deep blind holes in production applications. The up spiral design provides the best cut quality on the bottom surface of the material. Use these bits in CNC, hand-held or […]

Down spiral bits are a great choice for grooves and dadoes in single-sided veneers and laminates where chip removal is not a problem, or for through-cuts where finish quality on the top surface is the primary consideration. Also cuts well in solid wood. Ideal for use in CNC routers. When used in hand-held or table-mounted […]

Freud’s Flush Trim Bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes, or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and […]