Diablo’s new Bi-Metal Reciprocating Saw Blade for HVAC/Ductwork are specifically designed for the trades to deliver maximum performance in thin metal cutting applications. An ultra-hardened cutting edge delivers up to 5X longer life than those of standard blades. The compact blade body and fast puncture tip design allow users to easily engage in the material […]

Diablo’s new, high-performance Bi-Metal Hole Saws deliver faster cutting performance and increased productivity. Unlike anything on the market, Diablo’s hole saw system and mandrel design simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug […]

Diablo’s range of Torx driver bits delivers maximum performance, extreme durability and up to 50X longer life when installing and removing fasteners. An optimized tip design provides a strong, precise grip that reduces wear, stripping and slippage. MaxTorque Zone delivers ultimate torque resistance by absorbing torque, creating less stress at the tip when tightening and […]

Diablo’s spade bit range provides one of the fastest, most effortless hole drilling solutions on the market for fast, clean wood. The high-performance SPEED-TIP™ design self-feeds for faster hole making when compared to traditional spade bits. An optimized Curved Paddle design enhances the chip evacuation process for more holes per charge. This range is Impact […]

Diablo’s spade bit range provides one of the fastest, most effortless hole drilling solutions on the market for fast, clean wood. The high-performance SPEED-TIP™ design self-feeds for faster hole making when compared to traditional spade bits. An optimized Curved Paddle design enhances the chip evacuation process for more holes per charge. This range is Impact […]

Diablo’s range of magnetic nut drivers delivers maximum performance and extreme durability in driving hex nuts or self-tapping screws. A high-strength, permanent magnet provides a secure, anti-wobble grip when fastening screws and nuts into a variety of applications. MaxTorque Zone ultimate torque resistance absorbs torque for less stress at the tip when tightening and removing […]

Diablo’s Bi-Metal Reciprocating Saw Blades for Nail-Embedded Wood are specifically designed for maximum performance in all rough-in applications. These high-performance blades feature bi-metal technology that delivers up to 5X longer life compared to standard blades and a Full Contact Arched Edge Design that delivers faster cuts in fewer passes. Diablo’s patented variable tooth technology provides […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Diablo’s new, high performance hole saws deliver faster cutting performance and increased productivity. Unlike anything on the market, Diablo’s Snap-Lock Plus™ Mandrel System simplifies the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug ejection and […]

Diablo’s driver bit range of Torx bits delivers maximum performance, extreme durability and up to 50X longer life when installing and removing fasteners. An optimized tip design provides a strong, precise grip that reduces wear, stripping and slippage. Torque Resistant Design absorbs torque for less stress at the tip when tightening and removing nuts and […]

A white application pad is used for applying Rubio Monocoat oils. Use it as a stand-alone applicator or as a refill to the Aplicator Set. The synthetic scrubby fibers are less absorptive then a rag, allowing for less waste. A red application pad is used for applying Rubio Monocoat oils. The synthetic fibers are less […]

Diablo’s driver bit range of Hex bits delivers maximum performance, extreme durability and up to 50X longer life when installing and removing fasteners. An optimized tip design provides a strong, precise grip that reduces wear, stripping and slippage. MaxTorque Zone delivers ultimate torque resistance by absorbing torque, creating less stress at the tip when tightening […]

Diablo’s assorted sanding belt packs include a variety of grits needed to complete your sanding project. Featuring break-through innovations, Diablo’s sanding belts improve performance, extend life and increase productivity, saving you time and money on the job. Coated in a premium zirconium grit blend, these belts remove material faster and offer an extra-long sanding life. […]

Diablo’s bi-metal teeth jig saw blades are specifically designed for maximum durability, longer life and speed in clean wood applications. These high-performance blades feature an ultra-hardened cutting edge to deliver up to 5X longer life than standard blades. The optimized blade design reduces heat and pitch build up; for fast, clean cuts. T-shank design fits […]

Starbond Heavy Thin Cyanoacrylate (CA) – Super Glue, EM-40 Starbond Heavy Thin CA Glue EM-40, is a thin CA glue with a slightly thicker viscosity — the perfect solution to watery glue!  This “finishing” CA glue is well-known for it’s polished finish when several coats are applied, sanded, and shined.  With capillary action, it soaks into […]

Diablo’s Metal Demon™ Drill Bits redefine metal drilling with the industry’s first three-in-one bit to tackle all metals: mild, hardened, and stainless steels. Long-gone are the days where professionals must purchase and carry multiple bit types (Titanium, Cobalt, and Black Oxide), the Metal Demon™ bit’s exclusive design brings a one-bit solution for any application ensuring […]

Freud’s Flush Trim Bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes, or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and […]

Diablo introduces Carbide Teeth Hole Saws, the first hole saws on the market to cut both wood and metal (wood, nail-embedded wood, plastic, aluminum, metal, cast iron, stainless steel and metal). Delivering up to 50X longer cutting life than bi-metal, these new carbide teeth hole saws offer faster cutting performance and increased productivity. **Technical Specifications:** […]

Diablo’s Sand Demon™ Double-Sided Reusable Hand Sanding Sheets with WEB-Flex™ technology offer professional users an innovative double-sided, ultra-flexible, and ultra-durable sanding sheet solution. These game changing sanding sheets elevate professional users from traditional 9×11 sanding sheets to a superior reusable sheet that combines the flexibility for contour sanding and the durability for thick stock or […]

Freud’s Ultimate High Production Cut-Off blades features a high tooth count, alternate face shear technology and a 25-degree High Alternate Top Bevel (Hi-ATB) tooth geometry to decrease cutting pressure for less blowout and superior finishes in extremely high-speed cutting applications. Freud-made TiCo™ Hi-Density Carbide coupled with Freud’s Silver I.C.E. (Industrial Cooling Element) coating gives these […]