Diablo’s Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process […]

Set includes 2 blades, instructions for making box joints and building a box joint jig. **Technical Specifications:** – Brand: Freud – Application: To create a perfectly square, flat-bottom box joints, on a table saw without using a dado set or saw blade

Diablo’s Bi-Metal Reciprocating Saw Blades for Medium Metal with Full Contact Arched Design are specifically designed for maximum performance in metal cutting applications ranging fronm 1/16″ to 5/16″ thick. The blade’s Full Contact Arched Design with ultra hardened cutting edge provides faster cuts in fewer passes, resulting in less heat buildup and up to 5X […]

A white application pad is used for applying Rubio Monocoat oils. Use it as a stand-alone applicator or as a refill to the Aplicator Set. The synthetic scrubby fibers are less absorptive then a rag, allowing for less waste. A red application pad is used for applying Rubio Monocoat oils. The synthetic fibers are less […]

Diablo’s Universal Extensions provide access in hard to reach areas by extending the length of your power tool accessory. No tools are required with this extension in order to attach accessories, the quick-change feature allows users to switch between accessories with no down time. These extensions are ideal for use with Diablo’s Snap-Lock Plus Hole […]

Diablo introduces Carbide Teeth Hole Saws, the first hole saws on the market to cut both wood and metal (wood, nail-embedded wood, plastic, aluminum, metal, cast iron, stainless steel and metal). Delivering up to 50X longer cutting life than bi-metal, these new carbide teeth hole saws offer faster cutting performance and increased productivity. **Technical Specifications:** […]

Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, “soften” sharp edges of parts, and so many other tasks. Most of these bits also feature Freud’s unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your […]

Diablo HardieBlade™ is the only approved PCD (PolyCrystalline Diamond) tipped fiber cement blade recommended by James Hardie Building Products. Diablo’s co-branded Diablo blade generates up to 50% less respirable dust*, while delivering the longest life in all fiber cement materials. The PCD triple chip design offers up to 75-times longer cutting life than standard carbide […]

Diablo’s driver bit range of Phillips bits delivers maximum performance, extreme durability and up to 50x longer life when installing and removing fasteners. An optimized tip design provides a strong, precise grip that reduces wear, stripping and slippage. Torque Resistant Design absorbs torque for less stress at the tip when tightening and removing nuts and […]

Diablo’s premium sanding belts include breakthrough innovations that improve performance, extend sanding life and increase productivity. Featuring a premium zirconium blend, these belts remove material faster than other sanding belts and offer an extra-long sanding life. Clog-SHIELD™, Diablo’s own blend of grinding agents, reduces loading thus maximizing productivity. The superior grain bonding system, ENDURA-BOND™, provides […]

Diablo’s Fine Finish Saw Blades for Wood let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo’s particular blade is the ideal choice for trim […]

Diablo’s high-performance Carbide Tipped Pilot Bit delivers faster cutting performance and long life in highly abrasive materials and is designed to fit all Snap-Lock Plus™ Mandrels for fast and efficient tool change. **Technical Specifications:** – Brand: Diablo – Diameter: 9/32″ – Application: Drills fiber cement & ceramic materials.

This clever bit is designed to hang pictures, plaques or even shelves with completely concealed fasteners. The large diameter end bores holes to allow nail or screw heads to enter the slot, and the smaller diameter allows room for the shank of the nail or screw. Great for hard or soft wood or composites, using […]

Diablo’s range of Torx driver bits delivers maximum performance, extreme durability and up to 50X longer life when installing and removing fasteners. An optimized tip design provides a strong, precise grip that reduces wear, stripping and slippage. Torque Resistant Design absorbs torque for less stress at the tip when tightening and removing nuts and screws. […]

Diablo’s bi-metal teeth jig saw blades are specifically designed for maximum durability, longer life and speed in thick metal applications ranging from 1/8” to 1/4” thickness. These high-performance blades feature an ultra-hardened cutting edge to deliver up to 5X longer life than standard blades. A back taper blade design and Perma-SHIELD® non-stick coating reduces heat […]

Diablo’s Demo Demon™ Spade Bits provide one of the most durable, effortless, and longest lasting hole drilling solutions on the market for nail-embedded wood. The DEMO-Edge™ dual cutting edges coupled with a self-feeding Dura-Tip™ power through nail hits for a smooth drilling experience and up to 60X longer life. An optimized curved paddle design enhances […]

Freud Rounding Over Bits have so many uses that they are indispensable in any shop. Use them to make moldings, doors and drawers, “soften” sharp edges of parts, and so many other tasks. Most of these bits also feature Freud’s unique Quadra-Cut design for flawless finish in cross-grain applications. To get more use from your […]

Diablo’s high-performance Cobalt Pilot Bit delivers faster cutting performance and increased productivity and is designed to fit all Snap-Lock Plus™ Mandrels for fast and efficient connectivity. This new Diablo Cobalt Pilot Bit provides the ultimate cutting performance in hardened metals, cast iron, and stainless steel for faster efficient cuts. **Technical Specifications:** – Brand: Diablo – […]

Diablo’s sanding sheets are engineered to solve common sanding frustrations—material removal, clogging, and uneven wear—through cutting-edge innovation and high-performance materials. Designed for professionals, Diablo delivers durability, efficiency, and productivity in every sheet. The premium ceramic grain blend removes up to 3X more material than standard Aluminum Oxide sanding sheets. Clog-SHIELD™, Diablo’s own blend of grinding […]

Diablo’s range of magnetic nut drivers delivers maximum performance and extreme durability in driving hex nuts or self-tapping screws. A high-strength, permanent magnet provides a secure, anti-wobble grip when fastening screws and nuts into a variety of applications. MaxTorque Zone ultimate torque resistance absorbs torque for less stress at the tip when tightening and removing […]