Diablo’s track saw blade series sets a new standard for maximum performance, longer life, and superior quality cuts. Designed specifically for track saws, the Diablo HardieBlade™ is the only approved PolyCrystalline Diamond (PCD) tooth fiber cement blade recommended by James Hardie™ Building Products. This blade generates up to 50% less respirable dust*, while delivering over […]

Diablo’s SandNET™ discs with reusable sanding technology are the most advanced sanding discs on the market with up to 10X longer life versus standard sanding discs. The universal NET design fits all 5 and 8-hole sanders. Each SandNET™ discs features a clog-reducing nylon NET design coated in a premium ceramic blend grit for fast material […]

Diablo’s driver bit range of Phillips bits delivers maximum performance, extreme durability and up to 50x longer life when installing and removing fasteners. An optimized tip design provides a strong, precise grip that reduces wear, stripping and slippage. Torque Resistant Design absorbs torque for less stress at the tip when tightening and removing nuts and […]

Diablo’s spade bit range provides one of the fastest, most effortless hole drilling solutions on the market for fast, clean wood. The high-performance SPEED-TIP™ design self-feeds for faster hole making when compared to traditional spade bits. An optimized Curved Paddle design enhances the chip evacuation process for more holes per charge. This range is Impact […]

Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring […]

Diablo’s premium flat edge sanding sponges include breakthrough innovations for superior sanding performance, extended sanding life and increased hand-sanding productivity. Featuring a premium aluminum oxide blend, these flat sanding sponges remove material faster and offer up to 3X longer sanding life versus standard hand sanding sheets. The flat edges make it easy to access inside […]

Diablo’s Fine Finish Saw Blade for Wood allows trim crews to get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo’s particular blade is the ideal choice for […]

Diablo’s Fine Finish blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It’s ideal for crosscutting oak, pine, melamine, plywood, and moulding. (Blades ending in “S” are also ideal for radial arm saws). **Technical Specifications:** – Brand: Diablo – Diameter: 8-1/2″ – Tooth Count: […]

Diablo’s Ripping Saw Blade for Wood cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo′s unique design, extra-tough steel plate and proprietary […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Diablo’s range of magnetic nut drivers delivers maximum performance and extreme durability in driving hex nuts or self-tapping screws. A high-strength, permanent magnet provides a secure, anti-wobble grip when fastening screws and nuts into a variety of applications. MaxTorque Zone ultimate torque resistance absorbs torque for less stress at the tip when tightening and removing […]

Diablo’s bi-metal teeth jig saw blades application are specifically designed for maximum durability, longer life and fast cuts in wood applications. These high-performance blades feature an ultra-hardened cutting edge to deliver up to 5X longer life than standard blades. The optimized tooth and blade designs provide fast, effortless and clean finishes. T-shank design fits all […]

Freud’s new SD208S 8” Stacked Dado Set has a true 8” diameter and an optimized blade design for premium performance on all safety brake equipped and underpowered saws. This dado set delivers chip and splinter free flat bottomed grooves in plywood, melamine and solid wood.  The SD208S is compatible with all saws including Saw Stop, […]

Diablo’s general purpose saw blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo’s blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated […]

Diablo’s Steel Demon™ carbide teeth reciprocating saw blades are the first blades designed for extreme thin metal cutting in materials such as high strength alloys, cast iron and stainless steel. The blade’s carbide teeth create a full barrier to heat resistance for maximum durability. These high-performance carbide blades deliver up to 50X longer cutting life […]

Diablo’s high-performance Carbide Tipped Pilot Bit delivers faster cutting performance and long life in highly abrasive materials and is designed to fit all Snap-Lock Plus™ Mandrels for fast and efficient tool change. **Technical Specifications:** – Brand: Diablo – Diameter: 9/32″ – Application: Drills fiber cement & ceramic materials.

Diablo’s Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process […]

Diablo introduces Carbide Teeth Hole Saws, the first hole saws on the market to cut both wood and metal (wood, nail-embedded wood, plastic, aluminum, metal, cast iron, stainless steel and metal). Delivering up to 50X longer cutting life than bi-metal, these new carbide teeth hole saws offer faster cutting performance and increased productivity. **Technical Specifications:** […]

Diablo’s spade bit range provides one of the fastest, most effortless hole drilling solutions on the market for fast, clean wood. The high-performance SPEED-TIP™ design self-feeds for faster hole making when compared to traditional spade bits. An optimized Curved Paddle design enhances the chip evacuation process for more holes per charge. This range is Impact […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]