This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally […]

Freud router bits feature superior quality ball bearings. The 62-XXX set contains (1) 1/8” x 3/8” bearing, (1) 3/16” x 3/8” bearing, (1) 3/16” x 1/2” bearing, (1) 8mm x 22mm bearing, and (1) 2.5mm wrench. **Technical Specifications:** – Brand: Freud – Bearing Diameter: Assortment – Application: Repairing and altering the profile of Freud router […]

Freud’s Flush Trim Bit range includes bits for any trimming application. Use these bits for precise trim work on laminate counter tops, to follow patterns to create or duplicate intricate shapes, or for any task requiring a clean cut-off along a flush edge with a smooth, burn-free cut. Use on hardwood, softwood, plywood, composites and […]

Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut. Ideal for mortising hinges and hardware, or cutting grooves and dadoes. These […]

Ideal for following templates, routing sign lettering and other tasks where the pattern is placed on top of the work piece. The top mounted bearings on these bits make them ideal for almost any application where the work piece is being grooved or routed out. Use in hand-held or table-mounted routers to rout hardwood, softwood, […]

This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a “glue line” precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4″ to 2-3/4″ thick. This blade […]

Freud offers a huge selection of Decorative Edge Bits, most featuring our patented Quadra-Cut design for an extra-fine finish. Choose the profile you need to add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Ideal for routing hardwood, softwood, plywood or composites using hand-held or table-mounted routers. **Technical Specifications:** – […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers. […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s Next Generation Premier Fusion featuring the radical new Fusion Trio Tooth Design is the most technologically advanced general purpose blade on the market! Freud has designed these unique blades with a new radical tooth design called “Fusion Trio” which combines a special grind for the top, sides, and face of each tooth. This one-of-a-kind […]

The ultimate combination blade is now available in a thin kerf design for less amp draw and reduced material waste. This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, […]

Freud’s unique Premier Adjustable Rail and Stile System builds perfect doors in material from 5/8″ to 1-1/4″ thick, and also features Freud’s patented technology for producing extra-strong long tenon joints. The System also includes adjustable shims to adjust the panel groove from 7/32″(5.5mm) for thinner plywood panels to 3/8″ (9.5mm) thick for larger solid wood […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Create rock-solid interlocking corner joints with Freud Lock Miter Bits. For 90 degree joints use the 99-034 or 99-035 bits. These bits are designed to rout one piece horizontally on the router table, and the other piece standing vertical. For precise 45 degree joints us the 99-043 set, with one bit routing the tongue and […]

Freud’s huge selection of carbide tipped and solid carbide double flute straight bits are ideal for grooving, edge-routing and other general purpose routing tasks. The precise hook and shear angles provide fast cutting and a smooth finish in hardwood, softwood, plywood and composite materials. Tips are relieved to allow for efficient plunge cuts. Designed for […]

Freud’s new Cabinetmaker’s crosscut blade includes a 38 degree Hi-ATB (Alternate Top Bevel) tooth grind that delivers excellent crosscuts in double-sided veneer plywood and double-sided melamine. With its newly added Perma-SHIELD® non-stick coating and tooth geometry, this blade is designed primarily for heavy use in a cabinetmaker’s shop. The LU73R series is ideal for cutting […]

This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4″ thick. The blade’s deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2″ to 2-3/4″ thick, thinner or thicker materials may be cut, resulting in some […]

Freud Undersize Plywood bits are designed to rout perfectly fitted grooves and dadoes for today’s undersized plywood panels. These two sets include bits that match up to the actual thickness of 1/4″, 1/2″ and 3/4″ plywood. Choose 1/4″ or 1/2″ shank sets. Both include a wooden case, and are suitable for use with hand-held or […]

“V” Grooving bits are the perfect choice for making signs, engraving wood plaques, adding decorative accents to furniture or adding visual interest to millwork. Use these versatile bits in hand-held, table-mounted or CNC routers to rout hardwood, softwood, plywood, plastics and composite material. Please note that item 20-502 includes a top bearing to follow your […]