Diablo’s Ripping Saw Blade for Wood cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo′s unique design, extra-tough steel plate and proprietary […]

Diablo’s General Purpose Saw Blade for Wood is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo’s blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish […]

Diablo’s track saw blade series sets a new standard for maximum performance, longer life, and superior quality cuts. Designed specifically for track saws, the Diablo HardieBlade™ is the only approved PolyCrystalline Diamond (PCD) tooth fiber cement blade recommended by James Hardie™ Building Products. This blade generates up to 50% less respirable dust*, while delivering over […]

The LU96R is a thin kerf blade that is designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. […]

The ultimate combination blade is now available in a thin kerf design for less amp draw and reduced material waste. This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, […]

This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4″ to 3-1/2″ thick for crosscutting, and 1/4″ to 1″ thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. **Technical Specifications:** – Brand: […]

Ultra Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Flawless crosscuts in wood with minimal rework. Flawless finish in melamine & veneered […]

This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD™ coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4″ to 2-3/4″ thick. **Technical Specifications:** – […]

Diablo’s combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo’s large gullet provides the chip removal space […]

Diablo’s Fine Finish blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It’s ideal for crosscutting oak, pine, melamine, plywood, and moulding. (Blades ending in “S” are also ideal for radial arm saws). **Technical Specifications:** – Brand: Diablo – Diameter: 8-1/2″ – Tooth Count: […]

Diablo’s Ultra Finish Carbide Saw Blades for Wood offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction. Diablo’s blade produces a remarkably clean, chip-free cut that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding. **Technical Specifications:** – Brand: […]

Diablo’s Plywood Ripping Saw Blade features an exclusive Tracking Point tooth design and enhanced anti-vibration design for superior cutting performance in plywood ripping applications. Sheathing walls and roofs just got easier thanks to the specially formulated Diablo made TiCo™ carbide tips coupled with the blade’s Tracking Point design delivering five times longer life, maximum durability […]

Diablo’s next generation Aluminum saw blades are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and last longer than standard carbide in metal cutting applications. The specially formulated […]

Set includes 2 blades, 6 chippers, and shim set. **Technical Specifications:** – Brand: Freud – Application: To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts

This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers. […]

This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4″ thick. The blade’s deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2″ to 2-3/4″ thick, thinner or thicker materials may be cut, resulting in some […]

Diablo’s Steel Demon™ carbide saw blades produce fast, accurate cuts in a wide-range of mild steels. These blades feature high-performance TiCo™ Hi-Density carbide engineered exclusively to deliver maximum performance, superior quality cuts and longer life when compared to standard grinding discs. Designed with a Triple Chip Grind (TCG) and Perma-SHIELD® coating, these blades slice through […]

Diablo’s Fine Finish Saw Blade for Wood allows trim crews to get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo’s particular blade is the ideal choice for […]

Diablo’s Steel Demon metal cutting saw blades produce fast, accurate cuts in very thin mild steels 12-gauge or thinner. These blades feature Diablo made TiCo Hi-Density Carbide engineered exclusively to deliver up to 40 times longer life when compared to one standard bonded abrasive disc in mild steel applications. Designed with a Triple Chip Grind […]

Diablo’s Steel Demon metal cutting saw blades produce fast, accurate cuts in a wide-range of mild steels. These blades feature Diablo made TiCo Hi-Density Carbide engineered exclusively to deliver maximum performance, superior quality cuts and longer life when compared to standard grinding discs. Designed with a Triple Chip Grind (TCG) and Perma-SHIELD® coating, these blades […]